FORE  &  AFT  MARINE

TELEFLEX STEERING SYSTEM 

 
 

New from Teleflex Morse
BayStar Hydraulic Steering Kit 

HK4200A3
INTRODUCTION

INTRODUCTION
BayStar™˙hydraulic steering is brought to you by the manufacturers of SeaStar®, the most trusted name in pleasure boat steering. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP as rated by the engine manufacturer. Combine this with the superior SeaStar Solutions design team, rigid ISO quality control and teamed with the finest materials and precision manufacturing—BayStar continues the tradition bringing comfort and safety to boating.

The BayStar steering system consists of a super low friction helm for smooth comfortable steering, a balanced cylinder–featuring a compact design that fits most splashwells. For your convenience two lengths of 20’ cut to fit tubing are supplies (2 x 20’ length), two bottles of hydraulic steering fluid, and one fill tube for easy fill and purge.

BayStar is NOT recommended in applications with high steering effort (i.e. such as those using high performance engines or boats capable of attaining high speeds), customers should consider upgrading the system to SeaStar/SeaStar Pro steering . This will reduce the steering effort due to the fact that SeaStar steering provides more output power resulting in lower steering effort.

Features
• Patented No FeedBack™ Steering lock valves.
• 5 turns lock-to-lock.
• Up to 150 horsepower (total).
• Available either as separate components or as a complete system ready to install.
• Fixed cylinder.
• BayStar hydraulic tubing cut to suit application.
• Tilt option available.
• Requires 3” (76mm) cut-out hole in dash.
• Requires 21” (534mm) splashwell width.

CAUTION
DO NOT use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.

Notice Helm HH4314-3 INCLUDED

BayStar Steering kits come complete with everything needed for an install, (some engines require spacer kits and/or cylinder plate change, see application chart ) the compact cylinder does not require the engine manufacturer drag link for connection. For your convenience two lengths of 20′ cut to fit tubing are supplied with the HK4200A 3

BayStar Steering Kit (HK4200A3) Includes:
• 1 x BayStar Helm pump (HH43143)
• 1 x BayStar Cylinder (HC4645H3)
• 1 x BayStar Tubing kit (HT4420H, 2 x 20′ hoses)
• 2 x Hydraulic Steering Fluid (HA5430)
• 1 x Filler Kit (HA5438)

   
 

BayStar Cylinder

1-HC4645H BAYSTAR CYLINDER

 

Outboard BayStar Compact Center Mount Hydraulic Steering Cylinder - HC4645H

Part# HC4645H

Balanced cylinder, featuring a compact design that fits most splashwells.

 

BayStar Helm

Part# HH43143

BayStar Cylinder

1-HC4645H3 BAYSTAR CYLINDER

 

Outboard BayStar Compact Center Mount Hydraulic Steering Cylinder - HC4645H

Part# HC4645H3

Balanced cylinder, featuring a compact design that fits most splashwells.

 The BayStar Compact Hydraulic steering cylinder is ideal for small to medium outboard powered boats to 150 horsepower. The HC4645H cylinder replaces the older HC-4600 cyl. that is discontinued

Overview

With mechanical steering you sacrifice a degree of comfort, and traditional hydraulic systems may be more than
is needed on lower horsepower engines. The solution is finally hereBayStar!

Built in the tradition of the industry leading hydraulic steering, SeaStar, BayStar brings the same safety
and comfort now common on larger outboard powered boats to outboard powered boats with 150 HP max. (or less).

Motor Well Dimensions Required

No. OF ENGINES

A B C Minimum Engine
Center Distance
1
32" (813mm)
5" (127mm) 4" (102mm) N/A
2 Twin engine applications not available at this time.


a) Ensure there is no interference between the BayStar cylinder rod
(starboard side) and the splashwell boot or engine controls & cables.
b) Dimensional restrictions also apply to external motor mount brackets.
c) Ensure dimension 'A' maintains 32" (813mm) through full trim/tilt range.
d) Maximum transom thickness 3 (76mm).
e) Engines less than 70HP may require up to an additional 1 (25mm) of splashwell clearance.

For maximum of 150 HP
Kit will work on all motors from 1990 to date, 40-150 HP
You must have standard 12" Tilt Tube
Drag link supplied by the engine manufacturer
BayStar kits come complete with everything needed for an install
The cylinder utilizes the factory outboard engine supplied drag link for simplified installation
For your convenience two lengths of 20' cut to fit tubing are supplied (2 x 20' length)

 

 

Kit includes:
BayStar Helm Pump(1-HH-43143)
BayStar Cylinder (1-HC4645H3)
BayStar Tubing Kit  (1-HT4420)
2 bottles of hydraulic steering fluid (1-HA5430) 
filler kit .(1-HA5438) 

 

1-HK4200A3(LIST$1141.74)$599.99   NEW LOW SPECIAL PRICE $559.00  Limited Time Offer

REPLACEMENT PARTS

CLICK ON PART NUMBER BELOW

1-HH4314 BAYSTAR HELM

1-HC4645H BAYSTAR CYLINDER

RETURN TO TELEFLEX STEERING MENU

RETURN TO MAIN MENU