FORE  &  AFT  MARINE

TELEFLEX STEERING SYSTEM 

FRONT MOUNT SYSTEM Part# HC5345, HC5347, HC5348     Features   Independent engine tilt for twin engine installations. Easy steering. 5 turns lock to lock steering response.     Applications General purpose system. Single and multiple engine capability. Total power to 600 Hp. Typical applications include center console fish boats and cruisers.

FRONT MOUNT CYLINDER DIMENSIONS Part # HC5345

How to select a Front Mount Outboard Steering System

From the order guide below select the system configuration based on: a) the number of engines, and b) the total engine power to be installed. From the application guide below confirm that the Front Mount Cylinder will fit your specific make, model, and year of engine. Select the adapter kit for single engines or the tie bar kit (below) for dual engines. From the order guide select the appropriate helms and accessory hardware for each steering station. From the order guide select the fitting and hose kits required for the installation. Note: for hoses add the distance required, in feet to the last two digits of the part number. Confirm that there is sufficient space available in the Splashwell (see below) and dash areas for the steering components. See WARNING.

	Not recommended for use in installations where: a) chopper, cleaver or surface piercing propellers are used, b) the engine is highly elevated on the transom, c) engine trim tabs have been removed, d) the boat speed exceeds 75 mph (120 km/h), or e) the power exceeds maximum Coast Guard or M.O.T. recommendations for the boat.

Order Guide

ENGINE/CYLINDER CONFIGURATION Description Qty. Req. Model Part # SINGLE ENGINE (Single Cylinder) Applications up to 300HP Max. Number of Turns = 5 Cylinder Helm Hose Kit Oil 1 1 1 3 Front Mount SeaStar IStandard * Outboard Hose SeaStar Oil 1-HC5345  1-HH5271  1-HO51__ 1-HA5430 For Extra Steering Station Add: Helm Fitting Kit Hose Kit Oil 1 1 1 1 SeaStar IStandard * Add a Station Outboard Hose SeaStar Oil 1-HH5271  1-HF5501 1-HO51__ 1-HA5430 DUAL ENGINE (Single Cylinder) Non-Counter Rotating Applications up to 450HP Max. Counter Rotating Applications up to 600HP Max. Number of Turns = 5 Cylinder Tie-Bar Kit Helm Hose Kit Oil 1 1 1 1 3 Front Mount SeaStar IStandard * Outboard Hose SeaStar Oil 1-HC5345  1-HO60___ 1-HH5271  1-HO51__ 1-HA5430 For Extra Steering Station Add: Helm Fitting Kit Fitting Kit Oil 1 1 1 1 SeaStar IStandard * Add a Station Outboard Hose SeaStar Oil 1-HH5271  1-HF5501 1-HO51__ 1-HA5430 DUAL ENGINE (Dual Cylinder) Non-Counter Rotating Applications up to 600HP Max. All Counter Rotating Applications Number of Turns = 7 Cylinder Tie-Bar Kit Helm Hose Kit Hose Kit Hose Kit Fitting Kit Oil 2 1 1 1 1 1 1 3 Front Mount SeaStar IIStandard ** Outboard Hose Outboard Hose Outboard Hose Tee Fittings SeaStar Oil 1-HC5345  1-HO60___ 1-HH5272 1-HO51__ 1-HO51__ 1-HO51__ 1-HF5530 1-HA5430 For Extra Steering Station Add: Helm Fitting Kit Hose Kit Oil 1 1 1 1 SeaStar IIStandard ** Add a Outboard Hose SeaStar Oil 1-HH5272 1-HF5501 1-HO51__ 1-HA5430 OPTIONAL EQUIPMENT Back Plate Kit (for use with Standard Helms) 20 Degree Wedge (for use with Standard Helms) Autopilot Fitting Kit (for use with all Helms) * Tilt Helm-SeaStar I * Sport Tilt Helm-SeaStar I * Rear Mount Helm-SeaStar I ** Tilt Helm-SeaStar II ** Sport Tilt Helm-SeaStar II ** Rear Mount Helm-SeaStar II HA5418 HA5419 HF5501 HH5741 HH5291 HH5261 HH5742 HH5292 HH5262

Application Guide Single & Twin Engine Applications

ENGINE Manuf. Year Model Cylinder Tie Bar Kits Notes Twin Engine Single Cyl. Twin Engine Dual Cyl. HONDA 1996 TO DATE 1998 TO DATE 1998 TO DATE 75-90HP 115-130HP 30-50HP HC5345 HC5347 HC5345 HO6001 HO5063 HO6001 HO6002 HO5064 HO6002 Min. Eng. Center 27" HO5064 comes w/o TieBar Req. Kit HO5090   JOHNSON / EVINRUDE 1997 TO DATE 1991 TO DATE 1996 TO DATE 1991 TO DATE 1998 TO DATE 1977 TO 1990 65-175HP 250-300HP 90-225HP FICHT 200-225HP 65-70HP 4-STROKE 65-300HP HC5345 HC5345 HC5345 HC5345 HC5345 HC5348 HO6001 HO6001 HO6003 HO6003 HO6001 HO6001 HO6002 HO6002 HO6002 HO6002 HO6002 HO6002 | Min. Eng. Center 29" Min. Eng. Center 29" Req. Kit HO5090   MERCURY / MARINER 1984 TO 1994 1989 TO DATE 1998 TO DATE 2.4/2.5 EFI 75-300HP 30-60HP HC5345 HC5345 HC5345 HO6001 HO6001 HO6001 HO6002 HO6002 HO6002 May Req. Extensive Cowling Mods Min. Eng. Center 27" Req. Kit HO5090   NISSAN / TOHATSU 1990 TO DATE 90-140HP HC5345 HO6001 HO6002     SUZUKI 1986 TO DATE 1986 TO DATE 1986 TO DATE 1998 TO DATE 100HP 115-140HP 150-225HP 65-70HP 4-STROKE HC5345 HC5345 HC5345 HC5345 HO6003 HO6003 HO6003 HO6003 HO6002 HO6003 HO6002 HO6002 | | | Req. Kit HO5090   US MARINE / FORCE 1996 TO DATE 90-120HP HC5345 HO6001 HO6002     YAMAHA 1997 TO DATE 1987 TO DATE 1990 TO DATE 1998 TO DATE 1998 TO DATE 1998 TO DATE 2000 TO DATE 100-225HP 225HP 250HP 40, 50, & 60HP 70 & 90HP 80 & 100HP 4-STROKE 150-200HPDI HC5345 HC5345 HC5345 HC5345 HC5345 HC5345 HC5345 HO6001 HO6001 HO6001 HO6003 HO6003 HO6001 N/A HO6002 HO6002 HO6002 HO6002 HO6002 HO6002 N/A | | | Req. Kit HO5090 Req. Kit HO5090 Remove engine hooks/tab's. Consult Eng. Manuf. for Dual Applications   YANMAR 1994 TO DATE 27 & 36HP HC5345 HO6001 HO6002       Revision Date: Feb 16th 2001

Motor Well Dimensions Required

No. OF ENGINES A B C Minimum Engine Center Distance 1 2 22" (559mm) 44" (1118mm) 6" (152mm) 6" (152mm) 5" (127mm) 5" (127mm) N/A 26" (660mm) a) Dimensional restrictions also apply to external motor mount brackets. b) Maximum engine center distance for twin engine applications is 36" (914mm) using the standard tiebar. Dimension 'A' would have to be increased proportional to the tiebar length. c) Minimum engine center distance is 26" unless engine manufacturer recommendation is greater.

Typical Tie Bar Kits Twin Engine Single Cylinder Part # HO6001   1-HO6001(LIST $280.44)$250.02  Single Cylinder

Twin Engine Twin Cylinder Part # HO6002 1-HO6002(LIST $291.97) $276.99 Dual Cylinder For specific installation details and part numbers required for individual applications, please refer to our Supplement Instructions. These are available in downloadable PDF format.

Liquid Tie Bar Kit Part # HA5471 The Cylinder Alignment Valve will allow for the periodic required realignment of two outboard motors or rudders that are linked together with a Hydraulic Tie Bar as opposed to a solid link or Mechanical Tie Bar. Generally found on Pontoon Boats and Catamarans 1-HA5471(LIST$218.83)$196.94 Teleflex (Canada) Ltd. recommends that there is no substitution for a rigid Tie Bar.

RETURN TO TELEFLEX SEA STAR STEERING MENU

RETURN TO MAIN MENU