FORE  &  AFT  MARINE

TELEFLEX STEERING SYSTEM 

STERNDRIVE STEERING CYLINDERS     Features   Easy installation. Simple autopilot interface. Simple multiple steering connection.     Applications Fits most power and non-power assist sterndrives. Single and multiple drives .     [Dimensions]

How to select a Sterndrive Steering System From the order guide select the drive configuration based on the number of drives. From the application guide confirm that a cylinder is available for your specific make, model and year of drive unit. Select the cylinder that is appropriate for the drive. From the order guide select the appropriate helm and accessory hardware. Note that two helm pumps of different displacements are available for power steered sterndrives. The displacement of the helm affects the number of turns lock to lock. Select the helm displacement on the basis of the desired steering response. Select the appropriate tube or hose and fitting kits. Confirm that sufficient space is available in the dash and engine compartments for the equipment.

Order Guide

SYSTEM CONFIGURATION Component Description Qty. Req. Model Part # SINGLE & DUAL STERNDRIVES (For dual sterndrive applications use engine manufactures supplied tie bar.) Cylinder Helm Tube / Hose Oil 1 1 1 - 3 See Application Guide SeaStar I–Standard * (See Note 1) SeaStar II–Standard ** (See Note 2) (See Note 3) SeaStar Oil - 1-HH5271 1-HH5272 - 1-HA5430 For Extra Steering Station Add: Helm Fitting Kit Tube / Hose Oil 1 1 1 1 SeaStar I–Standard * (See Note 1) SeaStar II–Standard ** (See Note 2) Add a Station> –for SeaStar I helms –for SeaStar I helms (See Note 3) SeaStar Oil 1-HH5271 1-HH5272 - 1-HH5502 1-HH5501 - 1-HA5430 OPTIONAL EQUIPMENT Back Plate Kit (for use with Standard Helms) 20 Degree Wedge (for use with Standard Helms) Autopilot Fitting Kit (for use with all Helms) * Tilt Helm-SeaStar I * Sport Tilt Helm-SeaStar I * Rear Mount Helm-SeaStar I ** Tilt Helm-SeaStar II ** Sport Tilt Helm-SeaStar II ** Rear Mount Helm-SeaStar II HA5418 HA5419 1-HF5502 HH5741 HH5291 HH5261 HH5742 HH5292 HH5262 SeaStar I helms are the standard recommendation for both non-power and power steered applications. SeaStar II helms can be specified for power steered applications where faster steering response is desired. Review the application chart for recommendations. * For SeaStar I systems: use 3/8² dia nylon tubing ref part No. HT5_ _ * For SeaStar II systems: Use the following option A or B A) Outboard hose: Hoses must be ordered in standard lengths. They cannot be cut to length. B) Copper tube: 3/8" diameter copper tube and hose kit part No. HF5508.   These recommendations apply to factory stock sterndrives only. Modified installations may require a higher capacity steering system. If in doubt, contact our technical service for assistance.

Application Guide

ENGINE Manufacturer Steering Config. Engine / Drive Description Year Cylinder Description Number Turns Lock to Lock Note Model No. Part No. SStar I Helm SStar II Helm BMW NON POWER ASSIST ALL To Date BA125-8EMV 1-HC5330 4.9 N/A 1   POWER ASSIST ALL To Date 125-8EM 1-HC5328 4.9/5.8 3.4/4.1 2 MERCRUISER NON POWER ASSIST MERCRUISER I ALPHA I BRAVO I BRAVO II BRAVO III 1983 & Prior 1984 to Date 1984 to Date 1984 to Date 1984 to Date BA125-8EMV BA135-7EM BA135-7EM BA135-7EM BA135-7EM 1-HC5330 1-HC5332 1-HC5332 1-HC5332 1-HC5332 4.9 5.0 5.0 5.0 5.0 N/A 3.5 3.5 3.5 3.5 1 1,5,6 1,5,6 1,5,6 1,5,6     POWER ASSIST MERCRUISER I ALPHA I BRAVO I BRAVO II BRAVO III 1983 & Prior 1984 to Date 1984 to Date 1984 to Date 1984 to Date 125-8EM 125-8EM 125-8EM 125-8EM 125-8EM 1-HC5328 1-HC5328 1-HC5328 1-HC5328 1-HC5328 4.9/5.8 4.9/5.8 4.9/5.8 4.9/5.8 4.9/5.8 3.4/4.1 3.4/4.1 3.4/4.1 3.4/4.1 3.4/4.1 2 2 2 2 2 OMC NON POWER ASSIST 400/800 Series COBRA KING COBRA 1985 & Prior 1986 to Date 1986 to Date N/A BA150-7EM BA150-7EM N/A 1-HC5326 1-HC5326 N/A 6.0 6.0 N/A N/A N/A - 1,4 1,4     POWER ASSIST 400/800 Series COBRA KING COBRA 1985 & Prior 1986 to Date 1986 to Date N/A 125-8EM 125-8EM N/A 1-HC5328 1-HC5328 N/A 4.9/5.8 4.9/5.8 N/A 3.4/4.1 3.4/4.1 - 2 2 VOLVO NON POWER ASSIST 275 280 290 DIESEL To Date To Date To Date To Date BA150-7ATM BA135-7EM BA135-7EM BA135-7EM HC5314 1-HC5332 1-HC5332 1-HC5332 6.0 5.0 5.0 5.0 N/A 3.5 3.5 3.5 1 1,5,6 1,5,6 1,5,6     POWER ASSIST 275 280 290 DIESEL 32, DIESEL 41-42, DIESEL DPS & SX To Date To Date To Date To Date 1997 to Date 1992 to Date 1996 to Date N/A 125-8EM 125-8EM 125-8VEM 92-VPS 92-VPS 92-VPS N/A 1-HC5328 1-HC5328 1-HC5329 1-HC5331 1-HC5331 1-HC5331 N/A 4.9/5.8 4.9/5.8 4.9/5.8 4.9/5.8 4.9/5.8 4.9/5.8 N/A 3.4/4.1 3.4/4.1 3.4/4.1 3.4/4.1 3.4/4.1 3.4/4.1 - 2 2 2 2 2 2 YANMAR NON POWER ASSIST ALL 1989 to Date N/A N/A N/A N/A       POWER ASSIST ALL 1989 to Date 125-8EM 1-HC5328 4.9/5.8 3.4/4.1 2 1. Balanced system ­ ie: the number of turns lock to lock is equal port to starboard or vice-versa. 2. Unbalanced system ­ ie: the number of turns lock to lock is not equal port to starboard or vice-versa. 3. Requires additional clevis supplied by engine manufacturer. Reference Quicksilver part No. B98735A1. 4. Requires cylinder rod end adapter HA5424 supplied by Teleflex. 5. HC5332 replaces HC5326 as of January 2000. If installing HC5326 additional clevis supplied by engine manufacturer required (part number B98735A1).   6. The installation of the HC5332 sterndrive cylinder requires the use of SeaStar Outboard hose only. Do not use 3/8" copper or nylon tube.

RETURN TO TELEFLEX SEA STAR STEERING MENU

RETURN TO MAIN MENU