FORE  &  AFT  MARINE

    CORROSION PROTECTION

    OrProducts

    Corrosion Block


    CORROSION BLOCK GREASE

    MULTI-PURPOSE HIGH PERFORMANCE GREASE WON'T SOFTEN, BREAK DOWN, OR WASH OUT.

    OrProducts
    • Anti-corrosion/lubricant
    • Protects metal
    • Works as penetrate
    • Entirely nonconductive - can be applied to any circuit without fear
    • Safe to rubbers and plastics - won't melt your o-rings and gaskets
    • Long protection life - lasts from 6 months to 1 year, depending on application
    • Preventative maintenance - protect your equipment now before it's permananently damaged

    Corrosion Block Solves Your Problems!

    Do you need a corrosion control solution?
    Experts estimate that protecting your equipment now is ten times cheaper than repairing it later. As a bonus, electrical and mechanical parts will run smoother and more efficiently.

    So what is it?

    Corrosion Block is a revolutionary product that:
    kills     corrosion on contact,
    stops corrosion from ever coming back,
    and finally lubricates the area.
    Corrosion Block is safe to nearly all electronics.

    Did you know that Corrosion Block-

     
    • is the US military's corrosion control product of choice
    • was used during the filming of The Titanic
    • was used during the filming of WaterWorld
     
    These organizations trust their multi-million
    dollar equipment with Corrosion Block... Shouldn't you?
    Corrosion control and inhibition are important parts of any business.

    But what's so different about it?

    Corrosion block is a marine version of the aviation and
    military's ACF-50.  This is a specially formulated penetrate that
    was created to battle the worst kind of corrosion. 
    Click continue to learn how it works!
    Corrosion Block is a clean, clear, ultra-thin fluid which leaves a non-greasy astmospheric barrier to protect the base metal on interior surfaces. It leaves no gummy residue, and it can be sprayed on, or wiped on with a damp rag.

    Corrosion Block:
    Corrosion Protection and Rust Prevention Explained

    corrosion protection

    A typical sealant actually traps in the moisture. Future corrosion is slowed, but the damage is not reversed. This is not proper corrosion protection.

    rust prevention

    Corrosion block penetrates deep to the root of the problem, destroying existing corrosion and creating a protective barrier. The moisture is displaced to the top, where it evaporates off ! This is the best rust prevention method available.

    198-CBG2(List $3.99)$3.79  2OZ TUBE

    198-CBG3(List $9.20)$7.79 2-3OZ CARTRIDGE

    198-CBG14(List $13.20)$10.95 14oz CARTRIDGE

    198-CBG16(List $10.20)$9.99 16oz CONTAINER

    Corrosion Block is a clean, clear, ultra-thin fluid which leaves a non-greasy astmospheric barrier to protect the base metal on interior surfaces. It leaves no gummy residue, and it can be sprayed on, or wiped on with a damp rag.
    (1) Corrosion Block actively
    penetrates the corrosion     on
    the surface of the metal, electrically isolating it from the base metal.

    (2) It then proceeds to displace the moisture present in the cell, bringing it to the surface where it evaporates!

    (3) The cell is then filled and protected with a 40KV dielectric barrier to establish corrosion protection for at least 18 months.

     

    RETURN TO CORROSION PROTECTORS MENU

    RETURN TO MAIN MENU