FORE & AFT MARINE
BILGE PUMPS
Lovett Pumps
- Keeping the best boats afloat for more than 43 years...
 |
Lovett pumps are simply the best you can buy, as proven by experienced boaters for over 43 years, in thousands of boats. If you're concerned about who is watching your boat while you're not there, then you should have a Lovett pump on duty. |
Why are Lovett pumps the best?
Lovett pumps are the best for two reasons: quality and reliability. Just from the outside, the quality of the patented Lovett design is evident. Inside, you'll find world-class engineering which has made Lovett the leader in pumps for over 43 years.
|
Patented Lovett Airlock |
Unlike conventional pumps, Lovett submersible bilge pumps have no mechanical seals that can wear, corrode or fail. The patented design employs an airlock to trap air, completely protecting electrical parts even under 29 feet of water! |
|
Double-insulated Transmission |
Two belts running over phenolic pulleys transmit power from the motor shaft to the pump, preventing electrolytic corrosion due to stray motor current. Why does Lovett use two belts? It's simple: reliability. |
|
Positive Leveraged Automatic Switch |
The special positive-action switch restricts float movement, preventing frequent short-cycling in rough water. This allows the pump to still work but extends it's lifetime. |
|
Corrosion Resistance |
The special Monel metal shaft is more resistant to saltwater corrosion, more evidence of Lovett quality. Also, all of the switch-bearing surfaces are metal-to-plastic, eliminating possible metal-to-metal corrosion. |
Models and Pricing:
Model 900
Automatic, Built-in Switch Bilge Pumps
- 12 V power required (24 V & 36 V also available)
- 3/4" diameter discharge
- 900 GPH at 12 V, 4-amps
- 5-11/16" high X 8" wide X 4-11/16" deep (5-11/16" deep overall)