FORE  &  AFT  MARINE

GROCO Industries, Inc.

 

GROCOŽ is a third-generation manufacturer of top-quality marine, industrial and automotive hardware. Founded in 1918 on the principles of innovative design and sound construction, our goal is not to be the low-cost provider for the products we offer, but rather the choice of those who demand something a cut above the rest.

Parts, service and installation information can be found in the Service Manual accessible on the left, in addition to our distributors, on-line ordering in the event the distributor of your choice cannot meet your needs, and other information.
 

Browse our site or catalog for products information, flow charts, frequently asked questions and more. For further assistance, hours of operation, phone, fax and email information are provided below for your convenience.

P O L I C Y

GROCO LIMITED WARRANTY
GROCO does not sell to retail customers unless attempts to channel the customer's request for parts or products through qualified distributors has resulted in retail customer frustration and/or dissatisfaction.

PRODUCTS COVERED BY THIS WARRANTY: All products manufactured by GROCO

GROCO will repair or replace, at its discretion, any part of any of its products which is determined to be defective by the factory (or by an authorized GROCO service center) within one year* of the O.E.M. installation date or the distributor's original date of sale provided that:
  1. The product has been properly installed and used in accordance with the instructions packed with the product.
  2. No repairs or replacements have been made without written factory authorization.
  3. Proof of purchase can be supplied (receipt or invoice)
  4. The product is under original ownership.
  5. The product is properly packed to prevent shipping damage and shipped freight paid directly to the factory (or delivered to an authorized GROCO service center).
  6. The product has not been misused, abused, or altered in any way.
    GROCO products are designed and manufactured with the most durable materials available for resistance to the corrosive and electrolytic effects of salt water application. This does not mean, however, that the product will last indefinitely without proper care and maintenance. GROCO recommends regular weekly inspection of all parts of its products for signs of wear and/or deterioration of any kind, and replacement of worn parts with genuine GROCO parts. Failure to inspect regularly and/or replace worn parts when necessary constitutes neglect on the part of the owner, and could cause failure of or damage to the product, or to the vessel, of which the product is a part. Neglect voids product warranty.

The following conditions are not covered by this warranty:

  1. Repairs or repair labor performed by other than factory personnel, or authorized GROCO service center personnel.
  2. Damage to the product due to use to perform duties other than those for which the product was intended.
  3. Damage to the product due to the introduction of chemicals not intended for use with the product.
  4. Damage to the product due to winter freeze-up or improper winterization.
  5. Damage to the product due to use under extreme temperature or pressure conditions.
  6. Damage to the product due to jamming or clogging with foreign matter which the product is not intended to handle.
  7. Products found to be operating properly by factory personnel or authorized GROCO service center personnel.
  8. Physically damaged or altered products.
  9. Frayed motor leads.
  10. Products with missing or modified labels.

    *Certain products may have special warranty conditions which are outlined in the product instruction sheet.
 

450 MARION QUIMBY DR., STEVENSVILLE, MD
21666 - USA
PHONE 410-604-3800 - FAX 443-249-4030

 

 

GROSS MECHANICAL LABORATORIES, INC.
450 Marion Quimby Drive, Stevensville, Maryland 21666 - USA
Phone 410-604-3800
Fax 443-249-4030
 
TECHNICIANS
7:30am - 4:00pm
Eastern Standard Time

E-MAIL
 

SALES
8:00am - 5:00pm
Eastern Standard Time
EMAIL



CLICK ON PART NUMBER FOR MORE INFORMATION AND TO ORDER ITEM

APOLLO

  Product

   Description

PICTURE

34-AS100 Bilge Pump Control Kit
34-BV750 BV750 GROCO SEACOCKS
34-C6012V C6012V WASH DOWN SYSTEM
34-cp2012v cp2012v general purpose pump
34-CV050 CV050 GROCO BRONZE CHECK VALVES
34-G312V G312V GROCO U LUBE OIL CHANGE SYSTEM
34-HFB HFB HEAD
34-HTH500S Stainless Steel Thru Hulls
34-HTHC750S HTHC750S GRECO 90 DEG THRU-HULLS
34-HVL750 HVL750 GROCO VENTED LOOP
34-IBV500 IBV500 GROCO BALL VALVES
34-KH KH HEAD
34-PJRA-12V PJRA-12V GROCO WATER PRESSURE SYSTEMS
34-PSR-12V PSR-12V GROCO WATER PRESSURE SYSTEMS
34-PST=1 PST=1 GROCO ACCUMULATOR TANK
34-SA1000 SA1000 GROCO SA WATER STRAINER
34-SBV1250P SBV1250P GROCO SEACOCKS
34-SPO60N12V SPO60N12V GENERAL PURPOSE PUMP
34-SSC1250 SSC1250 GROCO SAFETY SEACOCK STRAINER
34-WSB1000P WSB1000P GROCO STRAINER
34-THXL750W  X-LONG Thru Hulls
34-TH750W Thru Hulls
34-FTH750W FLUSH HEAD  Thru Hulls

 

34-HSTH750W HIGH SPEED THUR-HULL
     
     
     
     
   
   
   
     
 

 

RETURN TO COMPANY LISTING MENU

RETURN TO MAIN MENU