FORE & AFT MARINE
TRIM MASTER MARINE, INC. - TRIM TABS
trim tabs ,boat trim tabs ,bennett, boat leveler, trim
tab accessory ,fuel economy
The waterproof toggle Switch
with affixed knobs is easy and simple to operate.
Switch
The
waterproof toggle switches are the best in the industry.
The switches come with all mounting hardware and a
mounting gasket.
The resettable relay allows the operator to manually
reset the relay in the event it has tripped due to operator error or malfunction of the unit
 |
SORRY THIS ITEM HAS BEEN DISCONTINUED AND IS NO LONGER AVAILABLE. PLEASE CHECK OUT OUR OTHER SELECTIONS |
398-1500(LIST $76.50)
|
Installation of Switch and Wire Assemblies |
||
Step C: Mounting Switch
Assembly to Dash.
1. Locate desired and easy access position for
switch.
2. Using a 2 1/2" hole saw, drill the holes
for the switch or cut with a
jig saw.
3. Using the switch bezel as a template, mark
the four corner mounting
screws. See Figure 4.
4. The toggle switch type assembly uses a
mounting gasket.
5. Install a wire harness, connect the five pin
male-female plug at
energy pack, fish wires
to helm.
6.Cut wire to desired length at the switch and
install ring terminals.
7. Mount switch with four #6 stainless steel
screws after switch
connections are made
(use 3/32"bit).
8.Connect color coded wires to color coded
screws of switch.
(Note: color coding on switch
body.) See Figure 5.
9. Connect hot lead to battery.
10. Connect ground lead from energy pack to
battery ground.
11. Bleeding system-work tabs full down and up
two to three times.
|
|
|
SORRY THIS ITEM HAS BEEN DISCONTINUED AND IS NO LONGER AVAILABLE. PLEASE CHECK OUT OUR OTHER SELECTIONS |
Limited lifetime warranty