Guest Battery Switches
Take a look inside a typical battery switch and you'll find small, spring-loaded 'line contacts' that provide the electrical gateway to your system. These line-contact designs provide a very small conductive area for high current flow, resulting in critical wear, carbon tracking and contact burns over time. At Guest, they understand the key to long, efficient switch life is large contact surface area.

That's why Guest switches feature an innovative 'sweep contact' design, which provides a large, flat surface area for maximum conductivity and efficiency, without the excessive wear, carbon tracking and contact burns of inferior line-contact designs. All Guest battery switches safely provide positive battery disconnect, isolate all circuits, and conform to U.S.C.G. safety standard 183.410 for ignition protection.

Guest Battery Switches Features

• Heavy-duty copper sweep contacts.
• Positive click-stop on all positions.
• Built-in skirt protects connections.
• "Make before break" contacts allow selection of all positions except "off" while engine is running.
• Alternator Field Disconnect (AFD) models allow selection of any position, including "off", without damage to alternator or electrical system.
• For 6, 12, 24 and 32 volt systems.
• Marine UL Listed.
• Momentary ratings are for five minutes continuous.
• 1 year limited warranty.

Guest 'sweep' contacts are just better
Guest's smooth, flat 'sweep' contacts provide up to 60% more contact area than inferior line-contact designs. The contacts are 'machined' to guarantee an electrically sound path, while line-contact designs suffer from a lack of matched contact surfaces, leading to arcing and excessive carbon tracking.
Guest contacts also provide a unique, self-cleaning sweep every time the switch is used, maintaining a matched contact area for maximum efficiency and long life.

To select the proper battery switch size, make sure your engine's cold cranking amperage is lower than the momentary rating of the switch. When using switches with outboards or alternators with internal voltage regulators, be sure to choose a switch without alternator field disconnect.

Description:  2111A Battery selector switch without alternator field disconnect (AFD), polycarbonate with sweep contacts. 230 Amps continuous, 345 Amps momentary made from UL 94-HB, UV stabilized polycarbonate. High-impact black molded case impervious to petroleum-based liquids.