Flush-Pro

Protect your Recreational Investment. Save Time in the Care and Maintenance of your Boat. Why hassle flushing a hot engine when you can do it quickly and easily on a cooled engine at your convenience? With Flush-Pro(TM), you can flush your direct drive, V-drive, Jet Drive, Applicable  Inboard/Outboard or Heat Exchange systems with an ordinary garden hose. By waiting until the engine has cooled, flushing is simple and much safer than working with a hot motor. Add  Flush-Pro to your system and stop spending excessive time doing routine maintenance and spend more time enjoying your boat!

How it works
Flush-Pro permanently installs in-line with the hose leading to your boat's impeller pump. when you want to flush your boat, simply remove the Flush-Pro cap, attach a garden hose, turn on the water and start the engine. Flush-Pro automatically responds to the water pressure from the hose. The double valve system closes the hull intake and allows the hose water to circulate. when you're finished, remove the hose and replace the cap. It's that easy! And don't worry, Flush-Pro also closes automatically when the garden hose is removed to prevent water from entering your boat if you forget to replace the cap!

Maintenance like a pro
Flush-Pro is an inexpensive way to protect your investment. Mechanics and skippers alike can easily perform routine maintenance tasks anywhere, even while dry docked. Flush-Pro's see through housing lets you monitor water flow through the valve system so oil changes and tune ups are a breeze, and better care means lower maintenance and repair costs.

Winterize your boat
Flush-Pro also helps you prepare your boat for storage. Using adapter provided, you can winterize your boat by running antifreeze from a bucket into the Flush-Pro system. Come spring, just flush and dispose of the antifreeze (as you would with your car's) before you put the boat back in the water. (Never flush antifreeze from a boat into a lake or river!)

Durable protection
Built to last. Flush-Pro is fully encased with an injection molded PVC see-through housing. It uses a durable UL approved valve and stainless steel springs to prevent corrosion within the Flush-Pro system. Flush-Pro can be purchased to fit 5/8 inch, 1 inch or 1 1/4 inch diameter hoses (these are standard sizes for the hose that leads to your boat's impeller pump). Flush-Pro has a five year warranty 

To Install Flush-Pro Flushing System

• Cut intake hose leading to engine's impeller pump and remove 5 inches of hose.

• Insert Flush-Pro valve and tighten hose clamps (During normal boat use, water continues to flow to pump).

• To flush engine, remove Flush-Pro cap and connect ordinary garden hose.

• Water pressure from the garden hose will automatically open Flush-Pro valve and begin the flushing process from the new water source.

Features

• Flush your boat engine safely and easily.
• Transparent so you can monitor water flow.
• Durable check valve system activated by water pressure from a garden hose.
• Check valve automatically shuts off hull intake when water pressure is applied.
• Check valve prevents water from entering boat even if you forget to replace Flush-Pro cap after flushing.
• Tune up and change oil easily at your convenience.
• Winterize your boat with optional adapter by running antifreeze from a bucket into the Flush-Pro system.
• Available for standard 5/8 inch, 1 inch, or 1 1/4 inch hose sizes.
• U.S. Patent No. 5295880
• 5 Year Warranty.
• 30 day money back guarantee.

Inboard Direct Drive Engine Packages

• P.C.M.
• MerCruiser 5.7 and above
• Volvo Penta
• Indmar
• Jet Drive
• Onboard Generators
• All ocean going systems with Heat Exchangers
• Outdrives without internal impeller pump

 Models Available