|
About
Accon Marine
| The
Accon name has been associated with superior quality
precision metalwork for more than 30 years. Accon began
as a
manufacturer
of transistor bases and other precision metal stampings.
In 1988, Accon entered the marine industry with the
introduction of our 102 series lift rings and the POP-UP®
CLEAT, and both the company and the marine industry were
changed forever. John and his son, Bernd, used their
vast tool and diemaking knowledge and experience to
develop an increasing variety of flush mounted, superior
quality marine hardware, and the marine industry
responded to the fresh ideas and product innovation that
became Accon’s trademark in the industry. In 1995,
Accon Marine became an independent company under the
leadership of Bernd “Bernie” Czipri, President. John
Czipri remains with the company, designing and
developing new products.
As
a family owned and operated company, Accon Marine
strives to provide the marine industry with the highest
quality, most innovative hardware and accessories
available anywhere. Our goal is not to be the biggest
supplier of marine hardware, but to be the best
supplier
of the best
marine
hardware. As boaters, we know that the quality and
function of a boat’s hardware affects the owner’s
satisfaction with the boat—so our products have to
meet our high standards before they are introduced to
the industry. If a product doesn’t meet the standard
of quality and function that we demand on our own boats,
we won’t sell it. It’s that simple.
Our
customers’ input into this process is extremely
important to us. Your suggestions for improving an
existing product, or informing us of your needs for new,
innovative products are always welcome. Many of the
products in this catalog were developed to meet our
customers’ needs for flush mounted marine hardware. If
you don’t find what you need in this catalog, please
call us and let us know what you’re looking
for—chances are we can adapt an existing product to
meet your needs, or possibly design a new product to
fill a void in the existing market.
Proud
member of the following organizations: |
|
|
Contact
Accon Marine |
| Phone: |
(727)
572-9202 |
| Fax: |
(727)
572-7621 |
| Address: |
13665
Automobile Blvd. |
| |
Clearwater,
FL 33762 |
| |
| Email: |
info@acconmarine.com |
|
|
|
Important
Warranty Information
PRODUCT
WARRANTIES
- Accon Marine Inc.
warrants that all POP-UP® Cleats will be free from defects
in materials and workmanship under normal use and service,
for the life of the boat on which the product is originally
installed. Accon Marine Inc. warrants that all other
products will be free from defects in materials and
workmanship, under normal use and service, for a period of
two (2) years of after date of purchase.
- This limited
warranty is not applicable if the product is damaged by
accident, improper installation, unreasonable use, lack of
proper maintenance, unauthorized repair or modification, or
any other causes not related to defects in material and/or
workmanship.
- Proper maintenance
consists of rinsing with fresh water regularly, and
following each exposure to salt water. Stainless steel
surfaces should be periodically wiped with a clean, soft
cloth. Plastic surfaces may be cleaned with a mild,
non-abrasive detergent solution, then rinsed with fresh
water as necessary.
- Under this
warranty, Accon Marine Inc.’s obligations are limited to
repair of the product at Accon Marine’s plant or
replacement of the product at Accon Marine’s option and at
Accon Marine’s expense. Any expenses involved in the
removal or reinstallation of the product are not covered by
this warranty.
- The product in
question must be returned to Accon Marine Inc. with proof of
original product purchase including date of purchase. The
acceptance by Accon Marine Inc. of any product returned
shall not be deemed an admission of a defect of product or
violation of the warranty.
- In order for Accon
Marine, Inc. to accept returned goods, they must be returned
in the same condition as they were shipped. This can
be accomplished by returning the products in the original
box used for shipping. If the original box is no
longer available, the products must be individually wrapped
in plastic and cushioned with bubble wrap, foam, peanuts, or
paper, as to ensure that none of the polished surfaces are
damaged.
- This warranty is
Accon Marine Inc.’s only express warranty of the product.
This warranty is expressly made in lieu of any other
incidental or consequential costs, expenses, or damages.
- This warranty gives
the purchaser specific legal rights. The purchaser may also
have other rights which vary from state to state.
|
|
CLICK ON PART NUMBER FOR MORE INFORMATION AND TO ORDER
ITEM
|
