FORE  &  AFT  MARINE

    BEARINGS

    Contact Us  ::  Home  


    Products: 3500 lb Axle Kit and Components - 5 lug hubs


    Assembly Components
    • Universal adaptor ring, hard-coat anodized
    • Bushing, stainless steel
    • Super Seal
    • Air pressure gauge unit cap, hard-coat anodized
    • Fill valve, bronze with nickel plating
    • Bonding agent
    Seal Specifications
    • ID 1 7/8
    • Double-lip
    • Specially molded composition
    Gauge pressure recommendations
    • 5-10 p.s.i.
    Patented Air-Tight Hub Design-
    Air-Tight Chamber designed to keep water from intruding into the bearing compartment.

    Easy to Install-
    Can be installed on your trailer in minutes.

    Quick Look Gauge-
    Confirms seal integrity at a glance. Air pressure of 5-10 psi can be easily monitored and maintained.

    Fail Safe-
    Future bearing failures can be immediately detectable.

    Environmentally Friendly-
    Ensures grease stays inside the hub where it belongs.

    Super Seal -
    Long lasting, heavy-duty molded seal with double lip protection, ensures water and contaminants will not breech into bearing compartment.

    Other Wheel Hub Devices are Not Water Tight & Can't be Monitored-

    • During Hub heating (from driving), and the cooling (from submersion), a vacuum is created that sucks water into the hub. Spring-Type bearing devices cannot keep all the water out. Water remains inside the hub cavity causing corrosion to the bearings and axle.
    • Spring systems cannot be seen or tested for accurate operation and give no indication of bearing failures until the wheel falls off on the highway.




    If you know your axle manufacturer, use this cross-reference chart to determine which bushing kit you need.

    All sizes are presumed accurate but not guaranteed. All measurement information has been provided by the manufacturer.
    AXLE MANUFACTURER BUSHING SIZE (OD)
    Continental - Tie Down Engineering Axle 1.66
    Eagle Trailer 1.72
    EZ Loader - Reliable Axle 1.66
    South Florida Trailers - Quality Axle 1.69
    Float-On (Bushing 1/2" wide) made prior to 1-99 1.68
    Float-On made after 1-99 Quality Axle 1.69
    Float-On made after 1-99 Tiedown Axle 1.66
    Load Master - Tie Down Engineering Axle 1.66
    Load Rite - Tie Down Engineering Axle 1.66
    Magic Tilt UFP Axle made after 3/2003 *
    Magic Tilt UFP Axle prior to March 2003 1.72
    Magic Trail UFP Axle made after 3/2003 *
    Magic Trail UFP Axle prior to March 2003 1.72
    Performance - Quality Axle 1.69
    Performance - Tie Down Engineering Axle 1.66
    Rolls Trailers 1.69
    Shorelander 1.72
    Real Extreme - Quality Axle 1.69
     

    Price is per hub kit, you will need 2 kits to do a single axle trailer and so on.

    AT-3500(LIST $119.98)$99.98

    RETURN TO WHEEL BEARING MENU

    RETURN TO MAIN MENU