FORE & AFT MARINE
BEARINGS
| Contact Us :: Home | ||
 |
|
|
| Products:
7000 lb Axle Kit and Components - 8 lug hubs |
Assembly Components
- Universal adaptor ring, hard-coat anodized
- Bushing, stainless steel
- Super Seal
- Air pressure gauge unit cap, hard-coat anodized
- Fill valve, bronze with nickel plating
- Bonding agent
- ID 2.5"
- Double-lip
- Specially molded composition
- 5-10 p.s.i.
All sizes are presumed accurate but not guaranteed. All measurement information has been provided by the manufacturer.
|
||||||||||||||
If you dont know your axle manufacturer, measure the axle outer diameter
where the seal will ride. Be sure to remove the bushing that is there
currently so your measurement takes place on the bare axle neck.
Patented Air-Tight Hub Design-
Air-Tight Chamber designed to keep water from intruding into the bearing
compartment.
Easy to Install-
Can be installed on your trailer in minutes.
Confirms seal integrity at a glance. Air pressure of 5-10 psi can be easily monitored and maintained.
Fail Safe-
Future bearing failures can be immediately detectable.
Environmentally Friendly-
Ensures grease stays inside the hub where it belongs.
Super Seal -
Long lasting, heavy-duty molded seal with double lip protection, ensures water
and contaminants will not breech into bearing compartment.
Other Wheel Hub Devices are Not Water Tight & Can't be Monitored-
- During Hub heating (from driving), and the cooling (from submersion), a vacuum is created that sucks water into the hub. Spring-Type bearing devices cannot keep all the water out. Water remains inside the hub cavity causing corrosion to the bearings and axle.
- Spring systems cannot be seen or tested for accurate operation and give no indication of bearing failures until the wheel falls off on the highway.
Price is per hub kit, you will need 2 kits to do a single
axle trailer and so on.
AT-7000(LIST $134.990)$119.98