FORE & AFT MARINE
BEEDE GAUGES
ALERT GAUGES
Alert Gauges
Warning & Shutdown Instruments
Custom designs
Made in the USA
Available now!
Custom engineered for bottom line performance
Engine instrumentation and electrical metersBenefits:
Custom Trip Points
Durable, high torque, heavy-duty Air Core
movement withstands severe vibration
Non-corrosive injection molded casing
Corrosion resistant exterior hardware
Heavy-duty, bright incandescent light source
with vibration resistant socket
Optional switched output; will switch 150 ma
maxSplash resistant
Load dump - meets SAE J1113
Custom Graphics
With black nylon bezel
Specifications for
Alert Gauges
Operating Voltage
12-16 VDC standard;
Over Voltage
Withstands 18 V continuously for one hour.
Reverse Polarity Protection
Standard, all instruments
Voltage Variance
1% of initial reading, 12-16 VDCLoad Dump
Meets SAE J1113, 3 positive 80 V transients, one
minute intervals.
Installation
Recommended Hole Size is 2.125" (2
1/8").Clearance depth required from back of flange is
2.40".
Temperature
Operating: -20
F to +185F (-30C to 70C)Maximum Change:
2% F.S. from 75F (24C)indication.
Shock
50G, 9-13 ms half sine, 25 shocks in each of three
orthogonal axes with no damage.
Vibration
0.060" double amplitude 10-80-10 Hz. Two hours
in each of three orthogonal axes: remains within
initial accuracy.
Salt Spray
Meets or exceeds ASTM 117, 48 hours.
Alert Standard Trip Points
Volt 10.5/15.5
BE-0592(List $ 28.25)$22.99 SPECIAL LOW PRICE $15.99