|
By eliminating metal-to-metal contact, Dual-Flex Marine and
Industrial Engine Mounts remove the danger of any excessive
impact. Dual-Flex synthetic rubber insulated mountings provide
the following benefits.
- Reduce Vibration
- Absorb Shock
- Reduce Noise
- Resist rust with Aluminum Housings and Zinc Dichromate
Plated Steel Parts
- Marine Mounts Available with E-Cote Protection
The special design and construction of the Dual-Flex Engine
Mount gives your application a soft, cushioning effect under
normal loads. There is no metal-to-metal contact between
supporting and mounting members.
Withstands Hostile Environments
As loads increase from normal, the resistance of the mount
increases very rapidly with a small amount of deflection.
The Dual-Flex has a synthetic rubber element that will
withstand temperature extremes and exposure to salt, oil and
grease.
Both vertical and lateral adjustment features are
available. Each mount has a 1-inch Vertical adjustment. The
threaded stud is equipped with two hex jam nuts. Simply
turn the lower nut to bring the engine to the exact height you
desire. Then lock the upper nut to hold its position.
Dual Flex mountings are available in several different
sizes for most models of marine engines. Many models are
available from stock for off-the shelf delivery. With
over 40 different models available, contact the factory for
suggested engine mountings.
Dual-Flex Marine and Industrial Engine Mounts |
Bushings,
Inc.
Note: On all inboard-outdrive installations, use DF-206
or DF-216 Series mounts.