By eliminating metal-to-metal contact, Dual-Flex Marine and Industrial Engine Mounts remove the danger of any excessive impact. Dual-Flex synthetic rubber insulated mountings provide the following benefits.

• Reduce Vibration
• Absorb Shock
• Reduce Noise
• Resist rust with Aluminum Housings and Zinc Dichromate Plated Steel Parts
• Marine Mounts Available with E-Cote Protection

The special design and construction of the Dual-Flex Engine Mount gives your application a soft, cushioning effect under normal loads.  There is no metal-to-metal contact between supporting and mounting members.

Withstands Hostile Environments

As loads increase from normal, the resistance of the mount increases very rapidly with a small amount of deflection.

The Dual-Flex has a synthetic rubber element that will withstand temperature extremes and exposure to salt, oil and grease.

Both vertical and lateral adjustment features are available. Each mount has a 1-inch Vertical adjustment. The threaded stud is equipped with two hex jam nuts.  Simply turn the lower nut to bring the engine to the exact height you desire.  Then lock the upper nut to hold its position.

Dual Flex mountings are available in several different sizes for most models of marine engines.  Many models are available from stock for off-the shelf delivery.  With over 40 different models available, contact the factory for suggested engine mountings.

DF-236-M1 Dual-Flex Marine and Industrial Engine Mounts