|
Isotemp
Water Heaters Designed expressly for marine use, the
advanced design of these water heaters represents a
welcome departure from traditional upright cylinders and
box-like designs of the past. These heaters feature
containment vessels of 316 stainless steel, NOT
corrosion-prone aluminum. Slim 15, Basic 24 and Basic 40
models may be mounted vertically or horizontally and are
secured by stainless steel mounting feet which rotate to
achieve the hose lead you wish. Engine water heat
exchanger coils are extra long for faster heating and AC
heating elements are nickel-coated copper for long life.
All models feature foam insulation for excellent heat
retention and incorporate service thermostats set to 160°F
to prevent the risk of bacteria. All include
thermostatically controlled mixing valves to prevent
scalding, reduce waste, and assure that water reaches the
tap at the temperature you wish.
- Material: Storage tank and connections: 316
stainless steel; Heating coil: nickel-plated copper;
cover and mounting feet: 304 stainless steel
- Port Sizes: Freshwater inlet & outlet fittings
are 1/2"BSP (1/2"NPT adapter fittings
included); heat exchanger inlet & outlets are
1/2"NPT
- Draw: 6.5A at 115V AC
- Warranty: One year warranty on parts and labor; five
years limited warranty on tank
Isotemp Basic and Slim water heaters give you
the following advantages:
- The design allows both horizontal and vertical
mounting options.
- Highest quality in material (AISI 316) and welding,
2 years full warranty and 5 years limited warranty on
the tank.
- Foamed expanded polyurethane insulation, for lowest
temperature loss.
- Immersion heater element, especially designed to
heat also the water in the bottom of the tank. The
element (230 or 115 volt / 750 watt), is made of
copper covered by nickel for longest lifetime.
- Engine water heat exchanger coil is extra long for
faster heating, good especially for sailing yachts.
- Special safety valve on 7.0 bar, with a built-in
two-way check valve, which reduces or prevents spill
water by expansion. Simple winter drain.
- All electrical installations ready Double overheat
safety thermostat. Delivery includes power cable with
EU-plug. Service thermostat set to keep the water
above 70°C, to prevent the risk of bacteria.
- Stable fixing feet in stainless steel adjustable 360°,
for easier also bulkhead installation.
- Thermostat mixing valve available as an option.
- Basic 40 and 75 are also available in versions with
double engine water heat exchanger coils for
connection also to a water based heater system.
|
