FORE & AFT MARINE
TENSION GAUGE
![]()
90 & 91 Tension Gauges
|
The Loos economy tension gauge takes the
guesswork out of cable tension adjustment. It's especially
designed for accurate, repeatable tuning of a sailboat's standing
rigging.
|
|
|
Manufactured of rugged anodized aluminum, the gauge is corrosion -resistant and will provide years of service. Please read the detailed operation instructions that accompany the gauges carefully to ensure complete accuracy. |
|
| Each Model includes a Loos & Company Cable Diameter Gauge, LOOS part no. GA-4 | |
|
|
|
Part Number |
Description |
|
91-Model A* |
Cable sizes: 3/23", 1/8", and 5/32" |
|
90-Model B* |
Cable sizes: 3/16", 7/32", 1/4" and 9/32" |
Corrosion-resistant gauge attaches to your shroud;
in seconds you can determine the load and adjust accordingly.
Benefits of correct rigging tension.
The rigging tension has an important influence on both the durability and performance of the system. Contrary to popular thought a slack rig is more punishing to the cables, fittings, and hull than a properly adjusted tight rig, since it can subject the entire system to excessive movement and can cause misalignment, wear, shock loading, and fatigue. Similarly, the sailing performance is affected since the rigging tension determines the shape and deflection of the mast and the sag of the forestay. The expert skipper will benefit by maintaining consistent rigging tension while developing the optimum sail shape and sailing tactics.
Specific
tension requirements for your application must be obtained from boat
manufacturer, mast manufacturer, sail manufacturer or manufacturer
of applicable product on which the cable or rod is used.
LO-90(List$99.00)$78.95
LO-91(List$89.00)$68.95