NightStar 2

Magnetic Force Flashlight

This Flashlight doesnt include batteries - it doesnt need them! Simply shake gently for 30 seconds and Nightstars high strength magnet generates enough electrical energy to provide 20 minutes of continuous light.

Powerful white LED light can illuminate a 12'dia. area at a distance of 50'
Lightweight, impact resistant and waterproof
Luminescent switch makes it easy to find in the dark
It even serves as a compass - pointing north when suspended horizontally!
The perfect flashlight for emergency situations or outdoor enthusiasts
It quickly pays for itself by not having to replace batteries or bulbs
10"L x 1-1/2"diameter
Five year warranty

Laboratory Tests

Submersion:
NightStar lights were placed in a water pressure chamber. At pressures ranging from 180 to 210 PSI, the lenses cracked and the lights were internally flooded. The average pressure required to cause failure was 190 PSI (or an equivalent water depth of 450-ft.).
[Test conducted by Hauser Laboratories]

Note: After testing the lights were drained and then baked at 180 degrees for 36 hours to eliminate residual water. Afterwards, all lights were fully operational.

Storage Temperature:
NightStar lights were subjected to 10 deep temperature cycles in a thermal chamber. Each cycle consisted of a 5-hour dwell time at -50 F (-45 C) and at +140 F (+60 C) with a 2-hourtransition time between each extreme. At the end of the test the lights were returned to room temperature and found to function perfectly.
[Test conducted by Hauser Laboratories]

Operational Temperature:
The same lights used in the storage temperature test were then cold soaked at-40F (-40 C). After 3 hours all lights operated as designed. The lights were then heated to +135 F (+55 C) for 3 hours. All lights worked perfectly at the high temperature limit.
[Test conducted by Hauser Laboratories]

Chemical Resistance:
NightStar lights were immersed for 3 days in 10 different chemical baths with the following results. (Note: Clear NightStar lights (with Polycarbonate housings) were used in chemical baths 1 through 8. Yellow NightStar lights(with Polycarbonate / ABS housings) were used in chemical baths 9, 10 and 11).
[Test conducted by Hauser Laboratories]

Chemical Agent:	Functional?:	Observations:
1. Saltwater (5% salt by weight)	Yes	On - off Switch harder to slide*
2. Isopropyl alcohol	Yes	No change
3. Ammonia-based cleaner	Yes	On - off Switch harder to slide*
4. Acetic acid (10% solution)	Yes	No change
5. Phosphoric acid (10% solution)	Yes	No change
6. Clorox Bleach (full strength)	Yes	On - off Switch harder to slide*
7. Drano drain cleaner (10% solution)	Yes	No change
8. Ajax cleaner (10% solution)	Yes	No change
9. Gasoline (regular unleaded)	Yes*	On - off Switch harder to slide
10. Motor Oil (10W30)	Yes	No change
11. Diesel Fuel	Yes	On - off Switch harder to slide*

*After cleaning the light in fresh water and applying a small drop of vegetable oil to the switch it operated normally.

SPECIFICATIONS:

Temperature:	NightStar lights were subjected to 10 deep temperature cycles in a thermal chamber. Each cycle consisted of a 5-hour dwell time at -50F (-45C) and at +140F (+60C) with a 2-hour transition time between each extreme. At the end of the test the lights were returned to room temperature and found to function perfectly.
Submersion:	NightStar lights were placed in a water pressure chamber. At pressures ranging from 180 to 210 PSI (or an equivalent water depth between 404-ft and 471-ft.), the lenses cracked and the lights were internally flooded. The average pressure required to cause failure was 190 PSI (or an equivalent water depth of 426-ft.). Note: After testing the lights were drained and then baked at 180 degrees for 36 hours to eliminate residual water. Afterwards, all lights were fully operational.
Chemical Resistance:	Operational after 3 days immersion in solutions of salt water, isopropyl alcohol, ammonia, Drano drain cleaner, acetic acid, phosphoric acid, motor oil, diesel fuel and gasoline. (* 10% solutions)
Electromagnetic Compatibility:	Conforms to Council Directive 89/336/EC. Measured RF (Radio Frequency) levels are far below limits for all frequencies.
Shock:	Fully functional after repeated random drops from a height of 6 ft onto a concrete surface.
Weight / Mass:	11 ounces / 308 grams
Size:	10" (25cm) long x 2" (5 cm) diameter (max).

WARRANTY

In the unlikely event that NightStar fails within 5 years of the date of purchase, AIT will repair or replace it at no cost. This warranty is granted to the original owner who has registered the product. It is necessary to include your name and current address with the returned product. This warranty is void if failure is due to severe mishandling or abuse.

Deliver your defective NightStar by USPS Priority Mail with delivery confirmation to:

Applied Innovative Technologies

P.O. Box 754

Fort Lupton, CO 80621

Your return shipping costs will be reimbursed.