Specialists in the Prevention of Evaporative Diurnal Emissions,
Overboard Vent Fuel Spills and Fuel Vapor Recovery Systems

Protecting our environment is what we are all about. Our Seacurefill Deck Unit™ prevents vent spills when refueling. With the aid of a slight vacuum on fueling docks, we can capture 100% of vapors (hydrocarbons) when refueling. The use of our Fuel Expansion Tank™ and Vapor Barrier System™ prevents loss that occurs from daily temperature changes (diurnal cycles).

The U.S. Coast Guard Department of Recreational Boating, Product Assurance Division and Office of Boating Safety have reviewed our Fuel Vent "No-Spill" system and concluded that it is functional, effective and solves the problem of fuel vent spill when refueling.

We believe we have developed the technology and the product to end fuel vent spills that often occurs when a vessel is refueling. Through the installation of our Deck Unit™ on a vessel followed with the proper use of the same while refueling the problem is eliminated. While there may be many different methods and ideas being proposed to prevent fuel vent spills, we believe the use of our Deck Unit™ offers the best solution. Our research has shown that any fuel tank containing a float system in the tank, designed to close off the vent when the tank reaches full capacity will only pressurize the tank and force fuel back out the fill pipe and onto the deck of the vessel. The vent must never be restricted in any way that would prevent the free flow of air. When this happens the tank immediately becomes pressurized. Without exception, our engineers have repeatedly proven this to be the case.

The Seacurefill™ "No-Spill" Fuel Recovery System is for boats of all types and sizes, pleasure or commercial. The patented Seacurefill™ deck fitting solves nasty fueling problems and assists in fuel conservation by allowing excess gasoline and diesel fuel to be contained. The complete system eliminates the nuisance of accidental fuel vent spills and is pre-engineered to handle vapor control and collection. Simple to use, the Seacurefill™ deck unit mounts next to the ship's fuel fill.

We are now working along with the EPA with their new proposed rule changes.

It's simple to use the Seacurefill™ system.

When you land at your fuel dock, ask them if they are equipped with the dockside Seacurefill™ quick connect hose and fuel recovery container. As more marinas get set up, you will be able to leave yours stowed.
	Remove fuel fill and Seacurefill caps. (Note: Base of the quick connect fitting is clearly visible inside Seacurefill unit.)
	Snap in the hose with quick connect fitting. Direct other end into fuel fill or separate container on dock.
	Start fueling. Stop as soon as you see fuel in hose. Your tank is full.
	Remove quick connect hose, replace the caps and you're on your way. Happy Boating!