7-1550 (FREE FALL) 22' TO 30'BOATS

20 Years Experience in Manufacturing

MARPAC  series of electric Anchor Windlasses suit both power boats and sailing boats, from 15 ft to 42 ft, by using update technology to ensure these windlasses have excellent water resistance, high performance, low current draw, and very easy to install. It can help you to avoid standing at the bow and lifting the anchor in rough sea. Just one push on the up-down switch and up comes the anchor or releasing it.
 


  • Efficient spur gears, low current draw, high output power
  • Heat radiating system can prevent motor overheating
  • Grade 316 stainless steel Gypsy takes both rope and chain
  • Electric brake can hold the Gypsy when not operating
  • Selectable free fall or power out mode (free fall model only)
  • Switch controls automatically free fall
  • Compact one-piece housing ensure water resistance
  • Aluminum alloy case with power coated finish
  • Stainless steel drive shaft and parts
  • Simple deck mounting with no under deck parts
  • Easy to install by yourself through the step by step manual included

 
 
 
 

7-1550

  
Suit Boats Size
6~9 m (20~30 ft)
Comparable Model
600W Model

Operating Voltage
12V DC or 24V DC

Max Working Load

275 kg (600 lb)
Typical Working Load
40 kg (90 lb)

Retrieval Speed

19 m/min (63 ft/min)

Pay-out Speed

22 m/min (73 ft/min)

Free fall or power out

Current Draw (Typical)

16 amp
Motor Type / Efficiency
Permanent Magnet / 82%
Motor Wattage I/O
700W / 300W
Gear Type/Efficiency
Spur Gear / 92%~98%

Chain Size

8 mm short-link
8 mm DIN 766
 5/16” G4 HT

Rope Size

12 ~ 14 mm (1/2"~9/16") three strand, medium lay

Dimension

304 mm  x  197 mm  x  153 mm
(12"  x  7.75"  x  6")

Weight

7.8 kg (17 lb)

8.2 kg (18 lb)
  Package Contents
  Control Unit: up-down switch, circuit breaker
Hardwares: thread rods, washers, nuts, screws, cable joiners
Templetes: windlass, control unit
User manual
Installation  manual