FORE & AFT MARINE
INVERTER
|
With filtered modified sine wave output, Freedom Marine inverter/chargers run virtually anything on your boat, from office equipment to household appliances and electronics. Temperature controlled multistage charging ensures that your batteries are recharged safely and efficiently. Its integrated transfer switch allows for automatic change-over between shorepower and inverter. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom Marine inverter/chargers can be paired with optional Link instrumentation. Product Features
Protection Features
Freedom Marine 10 Inverter Charger With an output of 1000-watts continuous and a surge of 3000 watts, Freedom Marine 10 inverter / charger is a value priced, reliable and complete electrical system. The inverter / charger provides silent, modified sine wave AC power on board so that you can experience the comfort and convenience of home when you are away from shore power. With a long track record for reliability, Freedom Marine 10 is installed in marine power systems around the world. To protect the inverter / charger from the harsh marine environment, Freedom Marine 10 comes with an aluminum chassis and conformal coated circuit boards. It integrates a high performance battery charger with digital echo charge to charge additional battery banks. Link battery monitors and advanced remote control panels can be used with Freedom Marine 10 to provide complete battery-state-of-charge information including DC voltage, current, amp-hours consumed, historical data and more for single or dual battery banks.
|
Specifications:
|
Model: |
Freedom Marine 10 |
| Output power (continuous) | 1000 W | ||
| Surge power (AC amps) | 25 A | ||
| Output frequency regulation | 50 or 60 Hz, quartz regulated | ||
| Inverter voltage regulation | 120 V +/-5% true RMS | ||
| Output wave form | Modified sine wave | ||
| Efficiency (full load) | 85% | ||
| Peak efficiency | 93% | ||
| No load current draw (idle mode) | 0.12 A | ||
| AC transfer switch | 30 A | ||
| Electrical Specifications - Charger | |||
| Charge rate | 50 A DC | ||
| AC input voltage range | 90 − 130 VAC | ||
| Battery voltage (nominal) | 12 VDC | ||
| Battery voltage range | 10.0 − 15.5 VDC | ||
| Low battery cut-out | 10.0 VDC | ||
| AC input (max. charge mode) | 12 A AC | ||
| Bulk charge voltage | 14.4 VDC | ||
| Float charge voltage | 13.5 VDC | ||
| Equalize charge voltage | 16.3 VDC | ||
| Battery charge outputs | 2 | ||
| Charge control | 3-stage | ||
| Battery type settings | Wet/Gel 1/Gel 2/AGM | ||
| Equalization | Yes | ||
| Temperature sensitive charging | Yes | ||
| General Specifications | |||
| Optimal operating temp. range | 32F − 104F (0C − 40C) *derated below 0C and above 40C | ||
| Optional remotes | Freedom Basic Remote or Link instrumentation | ||
| Dimensions (H x W x L) | 7.9 x 11.5 x 13.2 (201 x 292 x 335 mm) | ||
| Weight | 34 lb (15 kg) | ||
| Warranty | 30 months | ||
| Part numbers | 81-1011-12 | ||
| 84-2056-01 (Freedom Basic Remote) | |||
| 84-2019-02 (Link 1000) | |||
| 84-2000-06 (Link 2000 | |||
XA-81101112(List $1097.80)$999.99