|
ENGINE
MAKE/MODEL
|
GAUGE
RANGE
|
| Evinrude®/Johnson® |
| 9.9
to 65 HP (except 1989 40/48/50 HP) |
15
PSI (or 30 PSI)
|
| 40,
48, 50 HP (1989) 70 HP and larger In-Lines |
30
PSI
|
| All
V-Loopers thru 1992 |
15
PSI (or 30 PSI)
|
Cross-Flow
V’S
NOTE: 1991-92 Fastrack 150 will
require nipple/gasket kit OMC P/N 326467. |
30
PSI
|
60º
Loop-Charged V-6’S, 150-175 HP (1993-date)
90º Loop-Charged V-8’S, 200-225 HP (1993-date)
90º Loop-Charged V-8 250 HP w/30” Shaft (1993-up) |
60
PSI
|
| FORCE®: |
| All
with 1/8 NPT port in water jacket |
30
PSI
|
| Honda®: |
| All |
30
PSI
|
|
MERCURY®/MARINER®:
|
Mercury
35, 40 HP 2 cylinder w/thermostat
Mercury/Mariner 25, 40, 45, 50 HP 4 stroke
Mercury 50, 60, 70 HP 3 cyl./3 carb. w/thermostat
Mercury/Mariner 2.0, 2.4, 2.5 Liter V-6
Mercury/Mariner 135, 150 HP DFI/Optimax
Mercury/Mariner 250, 275, 300 HP & 3.4 Liter V-6
30 PSI
|
30
PSI
|
ALL
OTHERS
NOTE: Following models also
require pipe thread adapter — use Merc P/N
22-86306: Mariner 40/48/55/60 HP 2-cylinder and Merc/Mariner
250/275/300 HP & 3.4L V-6. |
15
PSI
|
|
SUZUKI®:
|
| All |
N/A
|
|
TOHATSU®/NISSAN®
|
90
HP & up w/built-in water pressure sender,
or 1/4” I.D. water bypass hose |
15
PSI (or 30 PSI)
|
|
YAMAHA®*
|
All
* Requires Metric Adapter, P/N
61886P |
30
PSI
|